10 Things You Need To Know Before Flying Your Drone

Drones are increasingly common these days for making special video recordings or even for entertainment. These flying machines can be controlled by smartphones, tablets or remote control. Some advanced drone models can reach considerable heights.

But before taking off, it’s important to be aware of some safety and usage tips so we created this guide for you.

10 Things You Need To Know Before Putting Your Drone To Fly

1) Regulatory research

You must research the rules for flying a drone in your country, before you even buy a drone. Drones are expensive toys and you must know where it is allowed to fly them. If you are from the U.S. you can check this guide for more information.

2) Test your drone near the ground (low altitude)

Before flying with the drone in high altitude, it is worth to make tests in a lower heights to observe the operation of the aircraft. That way, if there is any obvious defects, there is no risk of the drone dropping from a considerable height and causing any damage.

3) Check weather conditions

Drones may be adversely affected by strong wind currents, so it is essential to check the weather forecast before even leaving the house. Several applications are available to check this kind of data such as wind speed and rainfall forecast. Remember that it is not recommended to put your drone into action if it is raining, or in places with very low temperature, as this can damage the battery and other internal equipment.

4) Have the lastest firmware installed (update the drone firmware)

Just as cell phones and computers need to update their software, it is also critical to ensure your drone’s firmware updates, meaning the software that makes it work. In this way, the user receives corrections of possible bugs or errors that can hinder the flight and even more complete functions made available by the manufacturer. Some softwares even show prohibited or illegal places for flights, which can help a lot. When in doubt, go to the manufacturer’s website to see if the drone is up to date.

5) Analyze the drone physically

Look for cracks or pieces missing: sometimes during the flight the drone ends up releasing some item that needs to be repaired before the next flight. Check the firmness of the wings, if everything is connected correctly. Then check the camera, if included, and check the battery coupling so it does not come loose during the flight. Any cracking found should indicate the need of a replacement of the part with the manufacturer.

6) Program the landing location

If your drone has this setting, it is important to set a landing destination to return. With that, check out the GPS signal and see if anything can block thesignal. These adjustments can be made in the internal drone software on the smartphone or available controller. It is also important to set a minimum height, so that the aircraft does not hit a tree in the way, for example.

7) Find an open and wide area

Get to know the terrain where you will put your drone to fly. It is important that it is an open and wide area. Drones must be operated far enough away from densely populated areas, and must stay away from noise-sensitive facilities such as hospitals, schools and religious temples.

It is forbidden to operate model airplanes near airports and heliports, for example. And remember that flying a drone indoors can be risky and still break your equipment, walls or furniture.

8) Upload your phone or tablet

Is your drone controlled by your smartphone? So it is important to charge the battery fully before leaving the house. If the mobile equipment switches off during flight control, the user will lose control and may damage the drone. To help you save battery, close other apps and if you have a connection failure, try to pair the device again without panic.

9) Find out your drone’s battery capacity

Before leaving for the fun, check the battery slot on the drone and look for possible problems. If everything is visually correct, make sure the battery charge is full. In the drone’s software it is possible to visualize the energy level but it is worth putting a margin of error in it, so that the drone can land successfully.

Check how many minutes of flight the equipment can handle and return safely before the indicator reaches the red. If a drone does about 30 minutes of flight, for example, within 20 minutes you should already start to quit the action and start the return procedure, depending on the distance.

10) Learn the limitations of the drone

Each drone model offers its own functions, battery charge, maximum flight height and other items that must be memorized before putting it to fly. The manufacturer usually shows extra information such as speed of flight, time to go up and down, as well as features such as GPS and integrated cameras.

So, to maintain a good functioning, it is important to know your equipment and to think that the high and low temperatures can influence in that use. To avoid damage, read the manual more than once and if you have any questions about your drone model, contact the manufacturer of the drone.

We will be happy to hear your thoughts

      Leave a reply

      This site uses Akismet to reduce spam. Learn how your comment data is processed.